Polarized Plugs; Use Of Extension Cord - Hitachi FDV 16VB Manual De Instrucciones

Ocultar thumbs Ver también para FDV 16VB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English

POLARIZED PLUGS

To reduce the risk of electrick shock, this equipment has a polarized plug (one blade is wider
than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.

USE OF EXTENSION CORD

Make sure your extension cord is in good condition. When using an extension cord, be sure
to use one heavy enough to carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and
overheating. Table shows the correct size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the
heavier the cord.
Ampere
Rating
More
Not More
Than
Than
0 – 6
6 – 10
10 – 12
12 – 16
WARNING:
8
MINIMUM GAGE FOR CORD SETS
Total Length of Cord in Feet (Meter)
0 – 25
(0 – 7.6)
(7.9 – 15.2)
18
18
16
14
Avoid electrical shock hazard. Never use this tool with a damaged or
frayed electrical cord or extension cord.
Inspect all electrical cords regularly. Never use in or near water or in any
environment where electric shock is possible.
26 – 50
51 – 100
(15.5 – 30.5)
AWG
16
16
16
14
16
14
12
Not Recommended
101 – 150
(30.8 – 45.7)
14
12
12

Publicidad

Tabla de contenido
loading

Tabla de contenido