Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SEITE 1 - 148 x 210 mm - 085/0/-/51+F -
ENGLISH
Visio
™
Alfa
Light Curing Unit for the Preliminary
Polymerization of 3M ESPE Sinfony
Contents
SCHWARZ
- 04-0304 (sr)
1. Safety
ATTENTION!
Read these instructions carefully before connecting and
starting the unit! As with all technical equipment, the
proper function of the unit and the safe operation of the
™
unit can only be guaranteed when the general safety
precautions and the special safety instructions in this
operating manual are complied with.
1.1 The unit may only be used in accordance with the
following instructions. 3M ESPE will accept no
liability whatsoever for any damages resulting from
the use of this unit for other purposes.
1.2 Check to make sure that the operating voltage
indicated on the type plate matches the voltage of
the power supply before starting the unit. Incorrect
power supply voltage can destroy the unit.
1.3 Condensation can pose risks if the unit is brought
from a cold area to a warm area. For this reason,
the unit may not be started until it has reached
ambient temperature.
1.4 Do not introduce any foreign objects into the unit
in order to prevent electrical shocks. This does
not apply to the proper replacement of parts in
accordance with the operating manual.
1.5 Only original 3M ESPE parts may be used when
replacing defective parts in accordance with this
operating manual. No liability whatsoever will be
accepted for damages resulting from the use of
other parts.
1.6 If there is reason to believe that it is no longer safe
to operate the unit, the unit must be switched off
and labeled in order to prevent the unit from being
Page
used by another person. The safety of the unit
1
can be impaired, for example, when the unit does
not function as indicated or when there is visible
2
damage.
2
1.7 Care must be taken when cleaning the unit to
2
make sure than no cleaning fluids enter the unit,
as this can lead to short circuits or dangerous
2
malfunctions.
3
1.8 The unit may only be opened and repairs on the
3
unit completed by a qualified technician.
1.9 Do not expose the unit to solvents, flammable liquids
3
or strong heat sources, as these can damage the
3
plastic housing.
3
1. 1 0 Do not shine the light from the Visio Alfa unit directly
4
into your eyes or the eyes of another person.
4
1. 1 1 The unit must be switched off and disconnected
4
from the power supply before replacing the lamp.
1
Publicidad
Tabla de contenido
