Wireless Bluetooth - Phonic POWERPOD 630RW Manual Del Usuario

The Powerpod 630 includes a USB recording module allowing for recording of digital audio to USB flash drives. It also allows MP3 and
WMA files to be played back through the system. Please see the operating instructions below:
Playback:
The USB player supports WMA and MP3 playback
through USB
1. Power on the device.
2. Insert an appropriately formatted (FAT32) USB flash drive.
3. On the main menu, select "Playback" and press the PLAY
button.
4. Press the PLAY button to play the current track, or the << and
>>buttons to skip forward and backwards between tracks.
5. Press the MENU button while in the Playback mode to access
the File Browser, Delete File, Repeat Mode and Volume
Control functions.
6. Press and hold the MENU button for three seconds to exit
playback mode and return to the main menu.
Folders - Freely navigate songs in each folder on USB flash disc
using the << and >> buttons. Press PLAY button to select, press
MENU button to go back.
Repeat Mode - There 4 repeat modes available.
No Repeat - Play each file in the current folder or root for
once.
Repeat one - Constantly repeat selected song.
Repeat Folder - Constantly repeat all the song in the certain
folder or root.
Random – Enables random playback of files in current folder
or root.
Operation:
1. Activate Bluetooth by pushing the Bluetooth 'ON' button.
2. Search for and pair with "Phonic.BT" in the Bluetooth setup
menu of your cell phone, tablet, PC, or other Bluetooth-enabled
device.
3. If your device asks for a password, please enter "0000".
4. Audio signals received through the Bluetooth interface are con-
trolled via the Bluetooth rotary control.
5. If you cannot connect to the Phonic's Bluetooth input, it might
be because it is already connected to another device or some-
one has erroneously connected to it. Please restart your Pow-
erpod and attempt the Bluetooth connection again.
6
"R"
"W"
Recording
Record:
Users can record high quality WAV format
1. Power on the device.
2. Insert an appropriately formatted (FAT32) USB flash drive.
3. In the main menu, select "Record" and press the PLAY button
to enter recording mode.
4. Select between the 128 kbit/s and 192 kbit/s WAV recording
modes and press the PLAY button.
5. Record mode will begin in standby/pause. Push the Play/
Pause button to begin recording. The unit will save the
recorded file into the RECORD directory on the USB device.
6. Push the Play/Pause button to pause recording. Pushing
the Play/Pause button again will resume recording from the
position at which it was paused.
7. Press the MENU button at any time to save the recording.
Once the recording is saved, the system will automatically
skip to the next track.
8. To exit out of the record mode and return to the main menu,
press and hold MENU button for three seconds.
NOTES:
1. The USB rotary control will adjust the playback level only and
will not affect recording levels. The only level controls that will
affect the recording level are those found on the individual
input channels.
2. Users may experience very short instances of drop outs during
playback of recorded WAV files.

Wireless Bluetooth

6. When using smartphones and tablets, it may be an idea to turn
"Airplane Mode" or "Flight Mode" on to stop phone calls or push
notifications from interrupting your audio.
NOTE: Not all modern Bluetooth-enabled devices allow for use of
external audio playback. In the case of laptops in particular, Blue-
tooth may be used for data transmission only - depending on the
model. This is a limitation of these devices and you will not be able
to use the Powerpod Bluetooth function with these devices.
POWERPOD 630RW