Technical Data; Before Starting The Equipment - Robust RB-EH 5041 Manual De Instrucciones

Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Voltage .............................................230V ~ 50Hz
Power consumption ................................... 500 W
Cutting length.......................................... 410 mm
Cutter rail length ...................................... 450 mm
Tooth spacing ........................................... 16 mm
max. cutting ø ........................................... 12 mm
Cuts/min ...................................................... 3500
Sound pressure level LpA ................. 75,96 dB(A)
Sound power level LWA .................... 95,96 dB(A)
K uncertainty ........................................... 3 dB(A)
Vibration on steady grip ahv ...............2,785 m/s2
Vibration in handle ahv .......................3,298 m/s2
K uncertainty ..........................................1.5 m/s2
Weight.........................................................3,1 kg
Additional information for electric power
tools
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Anl_RB_EH_5041_SPK7.indb 15 Anl_RB_EH_5041_SPK7.indb 15
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual risks
cannot be rules out. The following hazards may
arise in connection with the equipment's const-
ruction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Warning! The electric power tool generates an
electromagnetic fi eld during operation. Under cer-
tain circumstances this fi eld may actively or passi-
vely impede medical implants. To reduce the risk
of serious or fatal injuries, we recommend per-
sons with medical implants to consult their doctor
and the manufacturer of the medical implant prior
to using the equipment.

6. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Fitting the hand guard (Fig. 3a-3b)
Attach the hand guard (Fig. 3a/Item 2) in the di-
rection of the arrow as shown in Figure 3a. Then
secure with the two screws (Fig. 3b/Item 8).
- 15 -
04.03.15 10:37 04.03.15 10:37