Lenco SCD-68 DAB+ Manual Del Usuario página 11

5.5 Listening to tape
General operation
Stop/eject key
Fast forward key & Fast
rewind key
Play key
Pause key
Playback
 Select "Tape" by the Function button (9)
 Put in the cassette tape.
 Press the play key
 Adjust the Volume up/down control (14) to the desired level.
 Use the pause key
 Press the stop/eject key
5.6 More features
Alarm clock setting
This function allows the system to turn on automatically and wake you up in CD, FM/DAB, Tape or USB
mode. Set the system at standby mode, then press and hold the "Timer" key to enter the Timer setting
mode, LCD will show Timer On time, Moreover, the timer clock will flash the hour digit, which means the
unit already entered the timer setting mode.
1) On time setting
2) Off time setting
3) Mode
Active/de-active timer function (In standby mode only)
1. To active the timer function, press the "Timer" button once; the timer indicator " " appears on the
LCD display (2).
2. To cancel the timer function, press the "Timer" button again; the timer indicator " " disappears.
Remark:
 If there is no music source being detected (CD or USB) when the preset time is reached, the system will
default to the "FM" function for wake up mode automatically. The system will preset at the latest radio
frequency being listened to before switching off.
 For FM/DAB wake up, the system will preset at the latest radio frequency being listened to before
switching off.
 For Tape wake up, please ensure that the cassette tape must be inserted into the cassette compartment
and the cassette play key must be pressed. Otherwise, no music will be playing once the timer reaches
its time.
 There are about 4 seconds for the alarm setting mode, this system will return to normal mode
Press to stop all deck operation. Press again to open the cassette door.
Press to start rapid tape winding in either forward or reversed direction. Press
stop/fast rewind key eject keys when the cassette spools stop turning.
Press to start playing tape.
Press to stop the tape operation temporarily. Press again to resume play.
to activate playback
when you want to stop playback temporarily.
when finished.
Press skip up or down
button (13) to store the timer starting hour, minute digit will flash, press skip up
or down (19/11) to set the minute. Then press the Timer button (13) to
store the timer on time.
After the above step, the LCD will show "Timer Off" and the hour digit was
flashing. Press skip up
Timer button (13) to store the timer off hour, and the minute digit will flash,
press skip up or down
button (13) to store the timer off time.
Then press skip up
press the Timer button (13) to store the timer on mode. Press skip up
down (15/21) to select timer on volume level and press the Timer button
(13) to complete the timer setting. The unit will return to the standby mode and
the display will show the timer icon " ".
(19/11) to set the hour. Then press the Timer
or down (19/11) to set the hour. Then press the
(19/11) to set the minute. Then press the Timer
or down (19/11) to select timer on mode. Then
or
11