Responsibility Of The Operator - Cillichemie Italiana Cillit KalkEx-Mobil Instrucciones De Montaje Y De Servicio

Pour the neutralised liquid down the drain using the
pouring aid on the outflow opening (2).
GB
If the amount of liquid (water and solvent) used
is greater than the capacity of the deliming
device's container, open the stop valve in the
supply line and the multifunctional valve and let
the liquid drain from the boiler until the filling
mark is reached. Set the multifunctional valve to
0 and close the stop valve in the supply line.
Neutralise as above.
Pour 20 liters of water into the KalkEx-Mobil and
rinse everything thoroughly with water. Rinse the
gas flow heater thoroughly at the cold and warm
settings. Check the reactive anode and replace if
necessary.
Passivating the delimed device
Passivating the cleaned metal surfaces reduces
susceptibility to corrosion.
Pour NAW liquid (according to description of NAW
liquid) into the KalkEx-Mobil and pump it through
the delimed device.
Check the pH value using indicator paper. If the pH
value is between 6.5 and 10.0, the passivating
agent can be disposed of. If the pH value is over
10.0, add deliming agent until the pH value is
below 10.0. While doing so, use the KalkEx-Mobil
with the multifunctional valve set to 0 for mixing.
Remove the valves of the connection hoses from
the device and insert plugs. Drain the KalkEx-Mobil
and thoroughly rinse with water.
Re-establish the water connections of the device
and check for leaks. Reconnect gas/power.
14
Warranty
If the unit malfunctions during the warranty period,
please contact your contract partner, the installa-
tion company and quote the model type and the
production number (see specifications or the type
plate on unit).

Responsibility of the operator

in accordance with German legislation
You have purchased a durable and service-friendly
product.
However, all technical equipment requires regular
servicing to guarantee optimal functioning.
Regular checks performed by the operator are
required for the warranty and proper function-
ing of the unit. In accordance with DIN 1988
Section 8 Appendix B, the unit must be inspected
regularly or, at the latest, every 2 months depend-
ing on service and operating conditions.
The replacement of wearing parts within the
prescribed maintenance intervals is also
required for the warranty and proper function-
ing of the unit.
Portable operating equipment must be tested
every 6 months by a qualified electrician in
accordance with BGV A2.
Defective electrical components must be
replaced by a qualified electrician or the Cillit
repair department in Schreisheim since an
insulation test is required.
Wearing parts
Gaskets and O-rings
Sleeves
Spacer ring
Locking ring
Valve body
Regulating sleeve
Hose nozzle
We recommend that you enter into a maintenance
agreement with your fitter or the after-sales service
department.
every 3 years
every 3 years
every 3 years
every 3 years
every 6 years
every 6 years
every 6 years