Hardware Overview - UI SUNMAX SolarPoint SM-SP-40 Guia De Inicio Rapido

Hardware Overview

PV Panel
Terminal
Interface
System LED
Reset
Button
Battery Terminal
Power Terminal
PV Panel Terminals H4 connectors for solar panel
Ethernet Ports
Output LED
System Battery
LED Terminal
Reset
Button
Description
Steady on when system is powered on;
Red when battery polarity is reversed.
Press and hold the Reset button for 10
seconds to restore factory default settings.
Press and hold the Reset button for 16
seconds if:
• The device does not respond to a factory
reset.
• The web interface is unreachable.
• There doesn't appear to be any other
noticeable activity
Four-pin terminal block for NTC and battery
Two-pin terminal block for power (24VDC out)
Supports 10/100 Ethernet connections and
passive 24V, 2-pair PoE output.
Steady on when output power is enabled.
Ethernet
Ports
Power
Terminal
PV Panel
Terminal
Output
LED