Hardware Overview; Interface Description - UI SUNMAX SM-SW-40 Guia De Inicio Rapido

Hardware Overview

System
PV Panel
Terminal
Interface
System LED
Reset
Button
Battery Terminal
Power Terminal
PV Panel Terminals H4 connector for solar panel
Ethernet Ports
Output LED
Battery
Terminal
LED
Reset
Button
Description
Steady on when system is powered on;
Red when battery polarity is reversed.
Press and hold the Reset button for 10
seconds to restore factory default settings.
Press and hold the Reset button for 16
seconds if:
• The device does not respond to a factory
reset.
• The web interface is unreachable.
• There doesn't appear to be any other
noticeable activity.
Four-pin terminal block for NTC battery
Two-pin terminal block for power (24VDC out)
Supports 10/100 Fast Ethernet connections
and passive 24V, 2-pair PoE output.
Steady on when output power is enabled.
Ethernet
Ports
Power
Terminal
PV Panel
Terminal
Output
LED