Hookup Diagrams - Alesis M1Active 520 Manual De Inicio Rápido Para El Usuario

Hookup Diagrams

The following two hookup diagrams should give you an idea of how your
M1Active speakers can fit into your recording rig.
If you are using a mixer in your studio, your setup will probably be similar to the
one below. All audio is routed through the mixer into your M1Active monitors. If
you wish to record the output of your mixer, you can take the output of the mixer
and send it back to your computer (the diagram below is configured this way).
The M1Active has both XLR and ¼" TRS inputs on the back for maximum
flexibility, but remember to use only one input at a time.
13