Cleaning Tips - Nilfisk Power Instrucciones De Manejo

F Parking the tube and nozzle
There are two grooves for parking.
One located on the underside to use
when machine stands on the back,
and the other on the back to use when
the machine is standing on its wheels.
Thermal fuse
The vacuum cleaner is fitted with a
thermal fuse, which prevents it from
overheating. If the thermal fuse blows,
the vacuum cleaner stops and must
cool down before it can be started
again.
Restart
1. Turn off the machine and unplug
from the wall socket.
2. Check that nothing blocks the air
flow through bent tube, hose, tube,
nozzle, dust bag or filters.
3. Let the machine cool down, for at
least 5-10 minutes.
4. Plug in the machine again and
start using the start/stop button.
The machine will not start until it is
sufficiently cool. If the machine does
not start turn it off using the start/
stop button and unplug. Try again in
a while.
WARNING
When activating the automatic
cord rewind, care must be taken
as the plug at the end of the cord
can swing during the last part of the
rewinding. It is recommended that you
hold on to the plug while rewinding.

Cleaning tips

Adjust the suction power by means of
the slide control on top of the vacuum
cleaner or the sliding valve on the
hose handle.
Crevice nozzle
G
Use the crevice nozzle for narrow
spaces.
Upholstery nozzle
H
Use the upholstery nozzle for
upholstered furniture.
Brush nozzle
I
Use the brush nozzle for curtains and
window sills.
Hard fl oor nozzle
J
Use the nozzle for hard floors.
Combination nozzle
K
Adjust the combination nozzle
depending on type of floor.
Turbo nozzle
L
Use the turbo nozzle for efficient
carpet cleaning.
The different models of these vacuum
cleaners can include different nozzles.
Power
EN
DE
FR
ES
PT
IT
NL
SV
NO
DA
FI
9