Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
WARNING: It is recommended that all the
repair or replacement for the tool shall be per-
formed by a qualified service technician.
GENERAL MAINTENANCE
Before each use inspect the grinder, switch and
cord for damage.
Check for damaged, missing, or worn parts.
Check for loose screws, misalignment or bind-
ing of moving parts, or any other conditions
that may affect the operation.
If abnormal vibration or noise occurs, turn the
tool off immediately and have the problem
corrected before further use.
CARBON BRUSHES
The brush and commutator of the tool shall be
examined for several months. Their good con-
tact makes the tool energetically. When the
spark around the commutator become greater
the carbon brushes may be changed.
CLEANING
WARNING: Before cleaning or performing
any maintenance, power supply shall be dis-
connected from tool. Compressed dry air blow
may be the most effective cleaning method.
Always wear safety goggles when cleaning
tools with compressed air.
Keep the tool handles clean, dry and free of oil
and grease. Use only mild soap and a slightly
damp cloth to clean your tool. Many household
cleaners contain chemicals which could seri-
ously damage the plastic and other insulated
parts. Ventilation openings must be kept clean.
Do not attempt to clean by inserting pointed
objects through openings.
CAUTION: No chemical agents are allowed
to used in cleaning the power tool. DO NOT
use petrol, turpentine, lacquer or paint thin-
ners or similar products.
E N G L I S H •
TECHNICAL DATA
VOLTAGE-FREQUENCY
ORBS PER MINUTE
SANDER CAPACITY
POWER
WEIGHT
U s e r's m a nu al
120 V ~ 60 Hz
20 000
1/2 SHEET
150 W
1,2 kg (2,6 lb)
11
Publicidad
Tabla de contenido
