König Electronic CMP-WNAP20 Manual De Uso página 2

Installation
Power plug connector
The front LEDs
State
POWER
WiFi Flashing
WAN Flashing
AP
Router
Station
WPS
LAN Flashing
Button State
WPS
Mode/Reset
Connect the Wireless 11n router to your network
To configure the router, open your browser, type 'http://192.168.0.1' into the address bar and click 'Go' to go to the login
page. Save this address in your Favourites for future reference. When you asked for your password, the User name is
'admin' and the password is 'admin'. You can change these later if you wish. Click 'OK' to login.
Ethernet controller
ON The power is turned on.
Wireless LAN link enabled.
ON Linked.
Data transferred.
OFF No link.
ON The router works in access point mode.
ON The router works in wireless router mode.
ON The router works in station adapter mode.
ON Wireless WPS security encryption enabled.
ON Ethernet cable link enabled.
TX or RX activity.
OFF No Link.
/ Push button to enable WPS link, be sure to press for one second only.
Mode switch :
Press the button for one second to toggle between AP/Router/Station mode.
/
Reset:
Press more than 5 seconds to reset the router.
ENGLISH
Connector for detachable antenna
Description
Description
2