König Electronic CMP-WNAP20 Manual De Uso página 3

Easy Setup Wizard is an easy way to set up the router step by step. The wizard will teach you to set up the router step by
step. Click Setup Wizard selection on the left or just click the "Start" button.
WAN Settings
• The first step is to setup up your WAN interface. Depending on your Internet provider's modem, you will need to select
the proper WAN type to connect to the Internet. Typically, if you can connect to the Internet directly through your
broadband modem, you would select "DHCP (auto config)". If not, you will need to contact your Internet provider for
more details. Once you have selected the proper WAN type, click "Next" to continue.
• The second step is setting up your wireless network name. Simply type in a preferred name for your wireless network,
for example: "Wireless" into the field "Network Name (SSID)". Once you have completed that step, click "Next" to
continue.
• The next step is setting up your wireless network security. We recommend that you set it with the following settings for
best security.
Caution: If you use these settings, you will need a wireless adapter that supports WPA-PSK encryption.
1. Select "WPA-PSK" for "Security Mode".
2. Select "TKIP" for "WPA Algorithms".
3. Enter a preferred wireless password into the "Pass phrase" field.
Note: You will need to remember this password if you want to connect to this wireless network.
Once you have completed filling out the necessary settings, click "Finish". When the status screen is displayed, you can
check the Internet link status, and then you may close your web browser. For advanced set up, click and expand the left
panel to set up the router.
3