Place Of Installation; Warning Signs - Vision TECHCONNECT TILT Manual De Usuario

USE oNLY DomESTIC AC oUTLETS
Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.
HANDLE THE PoWER CoRD WITH CARE
Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug
itself. Pulling the cord may damage it. If you do not intend to use your unit for any
considerable length of time, unplug the unit. Do not place furniture or other heavy
objects on the cord, and try to avoid dropping heavy objects on it. Do not tie a knot in the
power cord. Not only could the cord be damaged, but a short circuit could also be caused
with a consequent fire hazard.

PLACE of INSTALLATIoN

Avoid installing this product under the following conditions:
• moist or humid places
• Places exposed to direct sunlight or close to heating equipment
• Extremely cold locations
• Places subject to excessive vibration or dust
• Poorly ventilated places
Do not expose this product to dripping or splashing. Do NoT PLACE oBJECTS fILLED WITH
LIQUIDS oN oR NEAR THIS PRoDUCT!
moVING THE UNIT
Before moving the unit, be sure to pull out the power cord from the AC outlet and
disconnect the interconnection cords with other units.

WARNING SIGNS

If you detect an abnormal smell or smoke, turn this product off immediately and unplug
the power cord. Contact your reseller or Vision.
PACkAGING
Save all packing material. It is essential for shipping in the event the unit ever
needs repair.
If oRIGINAL PACkAGING IS NoT USED To RETURN THE UNIT To THE SERVICE CENTRE,
DAmAGE IN TRANSIT WILL NoT BE CoVERED BY WARRANTY.
4