Accessories Included - Vision TECHCONNECT TILT Manual De Usuario

SPECIfICATIoNS
• Power Supply: 100-240V, output 12VDC,
1000mA, 12W
• motor current and torque: going up: 0.7A,
30n / going down: 0.45A, 20n
• Top Surface material: Polished Black
Aluminium
• Cutout Diameter Range: 220-226mm
• outer Diameter: 240mm
• Product Dimensions: 164 x 145 x 200 (side
x side x height)
• Product Weight: 3.7kg
• Colour: Black
note: Because we are committed to
improving our products, the details above
may change without prior warning.
WARRANTY
This product comes with a 2-year return to base warranty, effective from the date of
purchase. This warranty applies only to the original purchaser and is not transferable. for
the avoidance of doubt, this will be taken from the information held by the appointed
national distributor at the point of sale. If the product is DoA (dead on arrival), you have
21 days from purchase date to notify the national distributor via your AV reseller. The
liability of the manufacturer and its appointed service company is limited to the cost of
repair and/or replacement of the faulty unit under warranty, except for death or injury
(EU85/374/EEC). This warranty protects you against the following:
• failure of any components, including the power supply.
• Damage when the product is first removed from its packaging if reported within 24
hours of purchase.
If you find you do have a problem with this product, you should contact the AV reseller
you purchased this product from. The original purchaser is responsible for shipment of
the product to the manufacturer's appointed service centre for repair.
We will endeavour to return repaired units within 5 working days, however this may not
always be possible, in which case it will be returned as soon as practicably possible. In line
with our WEEE commitments, the manufacturer endeavours to replace the faulty parts
of the product rather than replacing the whole unit. This warranty does not protect this
product against faults caused by abuse, misuse, incorrect installation, unstable or faulty
power input, which might be caused by ignoring the guidelines set out in this manual.
8

ACCESSoRIES INCLUDED

• 1 x Euro IEC Power cable 1.8m long
• 1 x Uk IEC Power cable 1.8m long
• 1 x Cutout Template
• 2 x mounting Ears
• 1 x Uk Power module with IEC power
cable
• 1 x EU Power module with IEC power
cable
• 2 x VGAf3.5mm module
• 1 x RJ45 Ethernet module
• 1 x Twin-RJ45 module
• 1 x Blank module