Publicidad
Idiomas disponibles
Idiomas disponibles
Fuel
The combustible to employ is Wood Pellet must comply with
2 A1
Standard.
•
It's prohibited to use solid combustible as straw, mais, hazelnut, pinecone or other
different from indicated in this handbook. We recommend to employ always certify
combustible UNI EN ISO 17225-2 of Your dealers.
INFORMATION ABOUT PELLETS
Pellets are realized with wood rejections that come from sawmills or from planing shops
and with wood fragment of forest industry. This raw material is shattered, dried up,
crushed, without any bound material till up to become the pellet fuel.
PELLETS PRESERVATION
Pellet has to be kept in a dry and clean rooms.
Starting
The appliance should set at work only after having completed the following operations:
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heatings you
can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
WOOD PELLET LOADING
Be careful during wood pellet loading operation ! The pellet bag should not touch the
warm appliance.
Be careful that no external corps, such as pieces of bag, wood pieces or other parts, that
can obstruct the screw feeder and damage it, enter into the pellet tank
The load of pellet is done from the top, after having removed the cover. During appliance
functioning, it is advisable to employ the specific glove, because the appliance surface
could reach high temperature. Check always the level of fuel in the container and check-
it often, to avoid the light off of the appliance. The cover of the container must be always
closed, except during pellet loading. Pellet container capacity : information on Technical
details part.
IT-GB-FR-ES mod. 540 – 540N
52/140
UNI EN ISO 17225-
Publicidad
Capítulos
