Tv Control Switch & Operation; Operation With The Remote Control; Input Selection; Changing Channels And Volume - Dual 22970 Manual De Instrucciones

TV Control Switch & Operation
1. Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On selection
switch
You can move the switch, upward or downward to
change the volume. If you want to change channels,
press the middle of the switch once (Position 3) and
then move upward or downward. If you press the
middle of the switch once more,source OSD will be
displayed. To select desired source, move the switch
upward or downward and release. If you press the
middle of the switch and hold about a few seconds,
the TV will switch to standby mode. Main menu OSD
cannot be displayed via the control button.
, switch is used for turning the TV on or off.

Operation with the Remote Control

Press MENU button on your remote control to display
main menu screen. Use Left or Right button to select
a menu tab and press OK to enter. Use Left / Right
/ Up / Down to select or set an item. Press RETURN
or MENU button to quit a menu screen.

Input Selection

Once you have connected external systems to your
TV, you can switch to different input sources. Press
SOURCE button on your remote control consecutively
to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume
by using the V ^ / v and CH ^ / v buttons on the
remote.

DVD - Control buttons

A- Disc loader
B- Play / Pause (
Plays / pauses the disc. When DVD menu (root
menu) is active, this button functions as "button
select" (selects the highlighted item in menu) if
this is not prohibited by the disc).
C- Stop / Eject (
Stops the disc playing / Ejects or Loads the
disc.
NOTE: You cannot eject the disc via the remote
control. To eject while playing a file; you should press the
STOP button "
English - 30 -
/ ) button
/ ) button
/ " (on the TV) three times.