Section 4 | Device Operation - DRAMINSKI GMM mini Manual De Uso

The GMM mini is ready for use when batteries are
properly installed in their compartment (check po-
larity).
Switch on the device using
a) Welcome message will be displayed, showing the
device name, software version, calibration version
and serial number:
www.draminski.com
Grain Moisture Meter mini
Firmware v: 1.42 K:1.10
SN: GM010007
b) Next, a list of available species will be displayed
and device model and current battery status will
appear in the upper part of the screen (recently
tested species will be backlit):
14

SECTION 4 | DEVICE OPERATION

.
GMM mini
Choose species
Rye
Canola
Spring barley
Oat
CAUTION! If batteries are too weak to continue
work, the device will display the following
message:
GMM mini
Change batteries
Which indicates that batteries must be replaced.
c) In order to save batteries, when no key is pressed
for a certain time, the device will go to a standby
mode and the backlight will turn off (that time can
be changed through the proper menu option –
see MAIN MENU section). Press any button to re-
turn to the operation mode.