Section 12 | Final Notes - DRAMINSKI GMM mini Manual De Uso

– Protect your grain moisture meter against direct
exposure to water. Avoid operating the device
in extreme temperatures. Do not allow moisture
condensing out of the air to accumulate on metal
parts of the device, as it may affect measurements,
– At the end of the season, clean and dry the
measuring chamber carefully. Leaving the device
dry guarantees long and reliable operation,
– Store the device in dry and warm conditions,
– Before any prolonged storage, remove batteries
from their compartment in order to eliminate
the risk of damage caused by battery leak.
We recommend using batteries of leading
manufacturers,
– In case of any problems with the device or
difficulties in interpretation of the results, please
contact the manufacturer DRAMIŃSKI S.A. or your
local authorised distributor before sending the
device for repair,
46

SECTION 12 | FINAL NOTES

– Do not dismantle the device on your own.
Any modifications or repairs performed by
unauthorised persons are unacceptable, as they
may result in permanent damage and void the
warranty,
– Always check if the mini-USB port rubber cap is in
place, otherwise dirt might get inside and cause
damage.