Conglom QL110 Manual Del Usuario página 7

Installation (continued)
INSTALLATION OF SIDE PANELS, BOTTOM PANEL AND LEG POSTS
NOTE: When assembling cabinet, place all parts on a soft,
protective surface. Use of an electric screwdriver can speed
up assembly. Please ensure the torque setting is adjusted
such that the screws are not stripped during installation.
- Install bottom panel (A1) into the slot of the side panels
(A2, A3). Ensure hinge hardware is along upper side.
A3
- Install screws to finish
securing bottom panel to
side panels .
Please contact cs@conglomkb .com or 1-877-333-0098 for further assistance .
A2 Hinge hardware
A1
Fig.2
DANGER: Always wear safety
goggles and gloves in order to
avoid personal injury .
- Install leg posts (B) in place.
Fig.4
7
I
B
Fig.3
CONGLOMKB .COM