Battery Backup - Brandt BCR160P Manual De Instrucciones

DISPLAY
PM Indicator
Display on/off indicator
ALARM 1 Indicator
BATTERY BACKUP
The clock and alarm settings can be protected against AC power
failure with the battery for a short period of time. If no backup
battery is installed or the power failure is prolonged, you will need to
set the clock and alarm settings again.
SETTING THE CALENDAR AND TIME
1. Place the unit on a flat stable surface. Plug the unit into the
mains socket.
• The display will show 0:00.
2. Press and hold SET/MEM until the time flashes on the display.
• The year digits will flash on the display.
3. Whilst the year digits are flashing, press or press & hold
until the desired year appears. Press SET/MEM to confirm.
• The month digit will flash on the display.
4. Whilst the month digit is flashing, press or press & hold
until the desired month appears. Press SET/MEM to confirm.
• The day digit will flash on the display.
5. Whilst the day digit is flashing, press or press & hold
the desired day appears. Press SET/MEM to confirm.
• The 12 or 24-hour format will flash on the display.
TIME Indicator
EN-4
ALARM 2 Indicator
/
/
/ until