Twin Star 23WM9029 Manual De Instrucciones Adjunto página 4

3. Slide the Center Front Panel (D) into position
using the guiding bracket. The panel should
be well braced when in the correct position.
4. Locate Mantel/Top (G) and lay fi nished side
up on top of completed assembly. From the
inside, use the Bolts (L2 ) and
Washers (M) through the pre-drilled holes in
the side panels. Then use a Allen Key (J)
to tighten the bolts (L2) with Washer (M).
E-3
Center Front Panel
D
Mantel/Top
G
Guiding
Bracket
L2
M
J