Twin Star 23WM9029 Manual De Instrucciones Adjunto página 5

5. Remove the two mounting brackets attached
to the back of the Left and Right Front panels.
Set aside with the wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT" INSTRUCTIONS
PRIOR TO INSTALLING ELECTRIC
INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE
INSERT IN YOUR FIREPLACE CLOSE
TO ITS FINAL POSITION.
6. Lift insert carefully into the back of the unit
and center in the insert opening. Do not drag
insert across Hearth/Base (A) as it may
scratch your unit.
7. Install the mounting brackets to hold insert
fl ush against the inside of the mantel front
panel.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES. MOVE
COMPLETED UNIT WITH GREAT
CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS
FINAL POSITION.
8. We have included two Tipping Restraints for
this unit. You must install this hardware to
prevent accidents or injuries. When properly
installed, this restraint can provide protection
against unexpected tipping of the Unit due to
small tremors, bumps or climbing. We
strongly recommend mounting this hardware
to a wall stud and your Unit.
Warning: You must install the Tipping
Restraint Hardware to help prevent
accidents or damage to the unit.
Twin-Star International, Inc.
Delray Beach, FL 33445
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 23WM9029
Made in China
Printed in China
© 2010, Twin-Star International, Inc.
E-4
Electric
Fireplace Insert
Completed Unit
Q
Wall Stud
Wall
Cabinet
Install
Insert
From
Back