First Use - Electrolux EXO27HEIWE Manual De Instrucciones

MODE DISPLAY
Displays the current selected mode.
Including AUTO, COOL, DRY, HEAT
(cooling & heating models only) and FAN.
TRANSMISSION INDICATOR
This transmission indicator will light when
remote controller transmits signals to the
indoor unit.
TEMP./TIMER DISPLAY
The temperature setting (from 17°C/62°F
to 30°C/88°F) or timer setting (0~24h)
will be displayed. If FAN only mode is
selected, there will be no display.
ON/OFF DISPLAY
This indicator will be displayed when the
unit is operating.
FAN SPEED DISPLAY
Displays the selected fan speed: AUTO,
HIGH, MED and LOW. Nothing displays
when the fan speed is selected in AUTO
speed. When AUTO or DRY Mode
is selected, there will be no signals
displayed.

7. FIRST USE

1. Ensure the unit is plugged in and power
is available.
2. Be sure the batteries are inserted
correctly in the remote control (the
lights on the remote control will be on).
3. Set the time by Control buttons and
confirm by pressing the Clock button.
4. Point the remote control to the indoor
unit and press ON/OFF button to turn
the unit on.
• In case of energy cut off or
product shut down when
removing the power cord,
or even when changing the
remote control batteries the
microprocessor will return back
to the AUTO mode.
FOLLOW ME DISPLAY
When pressing FOLLOW ME button in
COOL or HEAT mode, the remote sensing
function is activated and this indicator
displays.
TIMER DISPLAY
This display area shows the settings of the
TIMER. That is, if only the Auto-on time
function is set, it will display TIMER ON. If
only the Auto-off time function is set, it will
display TIMER OFF. If both functions are
set, it will display TIMER ON OFF which
indicates you have chosen both the Auto-
on time and Auto-off time.
LOCK INDICATOR
LOCK display is displayed when pushing
the LOCK button. Push the LOCK button
to clear display.
• The default operating mode
is AUTO. Once you select the
operating mode with remote
control, the operating conditions
will be saved in the indoor unit's
microcomputer memory. The
next time the air conditioner will
start operating under the same
conditions when you simply push
the ON/OFF button of the remote
control.
ENGLISH 17