11. EMERGENCY OPERATION
11.1 Split Type
Fig.18
12. OPTIMAL OPERATION
To achieve optimal performance, please
note the following:
• Adjust the air flow direction correctly so
that it is not forwards people.
• Adjust the temperature to achieve the
highest comfort level. Do not adjust the
unit to excessive temperature levels.
• Close doors and windows on COOL or
HEAT modes, or performance may be
reduced.
• Use TIMER ON button on the remote
controller to select a time you want to
start your air conditioner.
AUTO/COOL
Manual switch
AUTO/COOL
Manual switch
Units are equipped with a switch to run
emergency operation mode. It can be
accessed by opening the front panel.
This switch is used for manual operation
in case the remote controller fails to work
or maintenance necessary.
1. Open and lift the front panel up to
an angle until it remains fixed with a
clicking sound. For some models,
please use suspension bars to prop
up the panel.
Suspension
2. One press of the manual control
bars
switch will lead to the forced AUTO
operation. If press the switch twice
within five seconds, the unit will
operate under forced COOL operation.
3. Close the panel firmly to its original
position.
• Do not put any object near air inlet or
air outlet, as the efficiency of the air
conditioner may be reduced and the air
conditioner may stop running.
• Clean the air filter periodically, otherwise
cooling or heating performance may be
reduced.
• Do not operate unit with horizontal
louvre in closed position.
• The unit must be turned off
before operating the manual
control button. If the unit is
operational, continue pressing
the manual control button until
the unit is off.
• This switch is used for testing
purposes only. You had better
not choose it.
• To restore the remote controller
operation, use the remote
controller directly.
ENGLISH
31