Grounding Instructions - Sears Craftsman CMXEVBE176780 Manual De Instrucciones

GROUNDING INSTRUCTIONS

This Vac must be Grounded. If it should malfunction
or break down, Grounding provides a path of least
resistance for Electric Current to reduce the risk of
Electric Shock. This Vac is equipped with a Cord having an
Equipment-Grounding Conductor and Grounding Plug.
The Plug must be inserted into an Appropriate Outlet that
is properly installed and Grounded in accordance with all
Local Codes and Ordinances.
Fig. B
WARNING:
!
Improper connection of the equipment grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are
in doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance -
if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
6
SP7084-1 CMXEVBE176780.indb 6
3-Prong
Plug
Grounding
Prong
Properly
Grounded
Outlet
This Vac is for use on a Nominal 120 Volt Circuit, and has a
Grounded Plug that looks like the Plug shown.
A Temporary Adapter that looks like the Adapter shown
may be used to connect this Plug to a 2-Pole Receptacle,
as shown. If a properly Grounded Outlet is not
available, the Temporary Adapter should be used only
until a properly Grounded Outlet can be installed by a
Qualified Electrician.
The Green Colored Rigid Ear, Lug or the like extending
from the Adapter must be connected to a Permanent
Ground such as a properly Grounded Outlet Box Cover.
Whenever the Adapter is used, it must be held in place
by a Metal Screw.
NOTE: In Canada, the use of a Temporary Adapter is Not
Permitted by the Canadian Electrical Code.
Fig. C
2-Prong Outlet
Make sure this is a
metal screw connected
to a known ground
Metal
Screw
Green
Grounding Lug
3-Prong Plug
Adapter
8/3/19 7:22 AM