Caution; Description; Control Unit; Technical Data - Weller WSD 151 Manual De Uso

English
Thank you for placing your trust in our company by purcha-
sing the Weller Soldering Station WSD 151. Production was
based on stringent quality requirements which guarantee the
perfect operation of the device.

1. Caution!

Please read these Operating Instructions and the attached
safety information carefully prior to initial operation. Failure
to observe the safety regulations results in a risk to life and
limb.
The manufacturer shall not be liable for damage resulting
from misuse of the machine or unauthorised alterations.
The Weller Soldering Station WSD 151 corresponds to the EC
Declaration of Conformity in accordance with the basic safe-
ty requirements of Directives 2004/108/EC and 2006/95/EC.

2. Description

2.1 Control unit

The soldering station WSD 151 was specially developed for
soldering tasks with an extremely high heat requirement. The
150 W heater power combined with the optimal transfer of
heat to the soldering iron bit guarantees the high performan-
ce capability of the WSP 150 soldering iron. As an alternative
to the WSP 150, all the soldering tools listed in the list of
accessories can be connected to the unit. A microprocessor
makes operation simple and comfortable. The digital electro-
nic control system guarantees the best possible control per-
formance for various soldering tools. The soldering tools
themselves are recognized automatically by the soldering sta-
tion and assigned the corresponding control parameters. The
high-powered 24 V heating elements make excellent dynamic
performance possible, so that the soldering tools can be used
universally.
Various equipotential bonding possibilities for the soldering
iron tip, zero power switch and antistatic design of control

Technical Data

Dimensions in mm:
Supply voltage (8):
Power input:
Class:
Fuse (9):
Temp. control:
Precision:
Equipotential bonding (6):
13
166 x 115 x 101 (l x w x h)
230 V / 50/60 Hz
240 V/120 V / 50/60 Hz (dual version)
100 V / 50/60 Hz
150 W
1 (control unit) and 3 (soldering iron)
230 V; T800mA
240 V/120 V; T1,6A
100 V; T1,6A
50°C - 550°C
± 11°C
Via a 3.5 mm jack bush (initial state-hard-grounded)
unit and iron complete the high quality standard. The possibi-
lity of connecting an external input unit further increases the
variety of functions of this soldering station. With the optional
input units WCB 1 and WCB 2 it is possible to implement time
functions, locking functions, etc. Integrated temperature
gauge and PC interface are included in the extended scope of
the input unit WCB 2.
The temperature for the WSP 150 soldering iron can be set
over the range from 50°C - 550°C via 2 buttons (Up/Down).
The adjustment range
to 450°C if a different soldering tool is connected. The setpo-
int and actual value are displayed digitally. A blinking red LED
in the display signals that the preset temperaturehas been
reached – this serves as a optical regulator. Constant illumi-
nation means that the system is heating up.
2.2 Soldering irons
LR 21: Our "standard" soldering iron. With a power
of 50 watts and a wide spectrum of
soldering tips (ET series) this soldering iron
can beused anywhere in the electronics
sector.
LR 82: High-performance 80 watt soldering iron
for soldering work with high heat require
ments. The soldering tip is attached by a
bayonet catch to ensure correct position
when using different tips.
WP 80: The soldering iron WP 80 / WSP 80 is
WSP 80 characterized by its capacity for reaching
the soldering temperature quickly and
precisely. Its slim design and heating power
of 80 watts makes universal usage possible
from extremely fine to high-temperature
soldering work. Work can be continued
immediately after switching soldering tips
since the temperature is reached again
quickly.
is automatically limited