JVC SX-A305 Manual De Instrucciones página 3

Connecting the speakers
Connect satellite speakers and center speaker to the terminals on the amplifier using speaker cords supplied.
SX-A305F
(FRONT RIGHT)
SX-A305F
(SURROUND
RIGHT)
As shown in the figure, rotate the speaker terminal knob counterclockwise (
) to secure the cord. Reversing the ª and · polarities will greatly degrade the stereo effect and sound
the knob clockwise (
quality.
Before connecting the
speaker cords;
Twist and pull the
insulation coat off and
remove.
Specification
SX-A305F
Type :
Speaker :
Power Handling Capacity :
Impedance :
Frequency Range :
Sound Pressure Level :
Dimensions (W H D) :
Mass :
SX-A305C
(CENTER)
Speaker
terminals on
the amplifier
2-Way Bass-reflex type
Magnetically Shielded Type
12.0 cm cone 1
2.0 cm dome 1
100W
8 Ω
60 Hz ~ 50 000 Hz
85.5 dB/W•m
153 mm 251 mm 189.5 mm
3.2 kg each
SX-A305F
When connecting an amplifier or receiver
(FRONT LEFT)
Set the following items as follows, if it has
similar functions:
• Speaker size: Small
• Crossover (cutoff) frequency: 80 Hz
When connecting a JVC Powered Subwoofer
SX-DW303
Set the following items as follows:
SX-A305F
• The FREQUENCY control:
(SURROUND
LEFT)
• The CUT OFF FILTER button:
) and insert the speaker cord into the hole. Then rotate
· Terminal
ª Terminal
Black
White
SX-A305C
Speaker :
Power Handling Capacity :
Impedance :
Frequency Range :
Sound Pressure Level :
Dimensions (W
– 2 –
around 80 Hz to 120 Hz
to the — VARIABLE position
· Terminal
ª Terminal
Black
White
Type : 2-Way 3-Speakers
Bass-reflex type
Magnetically Shielded Type
10.0 cm cone 2
2.0 cm dome 1
100W
8 Ω
60 Hz ~ 50 000 Hz
86.5 dB/W•m
H D) : 350 mm 144.5 mm
Mass : 3.8 kg
189.5 mm