Ltc Audio FREESOUND10 Manual De Usuario página 2

Charging the Bluetooth Speaker
Plug the pin of the supplied charging lead into the mini-USB socket (9) of the speaker. Plug the other end into a USB port on your
computer or any other device allowing USB charging. When the light (11) glows red, you need to charge the built-in battery.
When the battery is fully charged, the light goes off.
Location of controls
1. + button: Long press for next song
2. ON/OFF switch: Long press to power the speaker on and off. When a call is coming in,
short press to answer/end the call. Please note: The speaker must be in Bluetooth mode
to benefit from the free-hands feature.
3. - button: Long press for previous song; Quick press to decrease volume
4. Short press: the light is dimmed. Long press: change the light mode
5. Short press: adjusts the brightness of the LED. Long press: switches the light off
6. M button: Short press to change the input source
7. USB socket: Compatible with WAV/FLAC/MP3 files. Max. 32 Gb. When connected to a
computer, it will supply an output voltage of 5V 2A to charge a mobile phone.
8. AUX input: If you do not have Bluetooth or do not want to use that feature, please
connect a 3.5mm Auxiliary cable into the speaker and the other end into your phone,
MP3 player, PC, tablet PC to play music. When you connect a line lead, the speaker will
be in LINE mode when you switch it on. If you want to change the input source, unplug
the line lead.
9. Mini-USB socket: Connect the supplied lead to a USB port or mains adaptor able to
charge the built-in battery. Please charge the speaker when the power is OFF.
If this socket is connected to a computer, you can insert a TF card and download music
files on the TF card.
10. TF card input: Max. 32GB. Compatible with WAV/FLAC/MP3 music files.
11. The status light will flash blue when pairing with another device. Once paired the light
will stop flashing.
In glows blue when the unit is playing music. It lights up in red during charge and turns off when the battery is fully charged.
Pairing the speaker with a Bluetooth enabled device
Keep the speaker and the Bluetooth device within 1m of each other during the pairing process. Press the ON/OFF switch. The
blue light will flash and the unit is in pairing mode. Set your mobile phone or other Bluetooth enabled device to search for
Bluetooth devices. When the Bluetooth device finds the speaker, select FREESOUND10 in the list of found devices.
Specifications
Bluetooth specification ............................................................................................................ 2.4GHz
Communication distance ............................................................................................................ 10 m
Frequency response .................................................................................................... 120Hz ~ 20KHz
Output power ............................................................................................................................... 5W
Sensitivity ............................................................................................................................. ≤ 800 mV
Signal to noise ratio ....................................................................................................... ≥ 80db ± 2db
Distortion ..................................................................................................................................... ≤3%
Battery ..................................................................................................... 18650 Li 2000 mAh battery
Playing time with full battery ............................................................ ≥ 8-10 hours (medium volume)
Dimensions .................................................................................................................. Ø165 x 80mm
Weight ......................................................................................................................................... 300g
GB
BLUETOOTH SPEAKERPHONE
;
Quick press to increase the volume
2