Safety Information - Pentair MYERS MES106 Manual Del Usuario

Safety

SAFETY INFORMATION

Use this pump only on a 115
volt circuit. Pump is
Hazardous
voltage
equipped with an approved
3-conductor cord and 3-prong, grounding-
type plug. To reduce the risk of electric
shock, connect it to a properly grounded,
grounding-type receptacle.
If circuit has a 2-prong receptacle, replace
it with a properly grounded 3-prong
receptacle installed in accordance with the
National Electrical Code and local codes
and ordinances.
Any extension cord used must be outdoor
grade, gauge 16 AWG or heavier, and not
more than 25' long.
Risk of fire or explosion if
used to pump flammable liquids or if used
in explosive atmospheres. Pump water
only with this pump. Pump is designed
to pump water at temperatures between
32°-77° F (0°-25° C) only.
Risk of electrical shock. Do
not allow the motor to get wet!
Risk of burns. During
normal operation, motor will normally
run hot enough to burn you. Do not touch
motor when it is hot.
Do not operate the pump continuously at a
discharge pressure of more than 12 psi
(83 kPa) or discharge lift of more than
28' (8.5 M), as the motor will exceed the
normal safe operating temperature and
may heat to 180° - 190° F (82° C - 88° C).
NOTICE: This unit is not designed for
applications involving salt water or brine!
Use with salt water or brine will void
warranty.
California Proposition 65 Warning
This product and related
accessories contain chemicals known to
the State of California to cause cancer, birth
defects or other reproductive harm.
2