Cleaning And Maintenance - cecotec Total Iron 8500 Implode Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
ENGLISH
these ironing instructions in any case.
The iron heats up quicker than it cools down, therefore, you should start ironing the articles
that require the lowest temperatures such as those made of synthetic fiber.
If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
Silk and other fabrics that are likely to become shiny should be ironed on their inner side.
Velvet and other textures that rapidly become shiny should be ironed in one direction with light
pressure applied. Always keeps the iron moving at any moment.
Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set temperature
dial to the third position and use a dry cloth as a mat.
Never iron over zips or rivets in the cloth. This will damage the soleplate.
Warning: When ironing woolen fabrics, shining of the fabric may occur. In this case, it is
suggested to turn the article inside out and iron the reverse side.
Setting
1
2
3
Maximum

5. CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power outlet and let the appliance cools
down.
Wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive
(liquid) cleaner.
Warning: Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
Clean the upper part of the device with a soft damp cloth. Wipe the water drop on the unit base
and the heatproof stand with a dry cloth.
If there is any fabric adhered to the soleplate, use a damp cloth with vinegar to wipe off the
soleplate.
To remove the mineral deposits gathered in the inner steam generator, follow the following
steps: in the first place, reverse the unit base and place it on a level surface horizontally, make
sure that the unit base is placed stably, then gently prise it up with a screwdriver on the cover
26
TOTAL IRON 8500 IMPLODE / 9000 TURBO-BOOST
Total Iron 8500 Implode 9000 Turbo-Boost.indd 26
Temperature
70 ºC-120 ºC
100 ºC-160 ºC
140 ºC-210 ºC
170 ºC-225 ºC
Fabric
Acetate, elastane, polyamide,
polypropylene
Cupro, polyester, silk
Triacetate, viscose, wool
Cotton, flax
15/11/19 15:00

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Total iron 9000 turbo-boost

Tabla de contenido