Kitett KOLOR PLAY Manual De Instrucciones página 29

1 - Wash your hands in soapy water before
handling breast pump components.
Assemble the handle:
2 - Assemble the membrane and the base with
the stem. Make sure the base fits correctly
against the membrane.
3 - Insert the whole assembly into the body of
the breast pump and squeeze the rim tightly
to ensure a good watertight fit around the
membrane.
4/5 - Clip the handle onto the body via the
notches and horizontal bar (click).
Assemble the accessories:
6 - Place the collector bottle directly onto the
taupe-coloured "Clean Valve" (the valve should
be fixed to a smooth, clean surface). To ensure
hygiene, both parts of the valve should be pre-
assembled after cleaning: valve and positioning
ring. (see chapter 3)
If necessary, take care to handle the "Clean
Valve" by the rim (taking care not to touch
parts that may be contact with the breast milk).
The innovative technology of the «Clean Valve»
valve, exclusive to KITETT®, prevents the risk of
contamination through contact with fingers in
the breast shield.
7- Screw the KITETT Kolor® breast shield onto
the collection bottle (ensuring that the taupe-
coloured "Clean Valve" is correctly positioned
in the bottle)
8 - Fit the body/membrane/handle unit onto
the breast shield. Make sure everything is
interlocked (click).
Place the assembled breast pump on the bottle
stand for optimal stability.
GB
27