EDM F-43389675 Manual De Instrucciones página 21

Hedge trimmer
Features
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all opera-
ting features and safety rules.
Guard
The guard helps to deflect chips or other debris away from
the operator's hands.
Lock-out button
The lock-out button prevents unintentional starting of the
hedge trimmer.
Scabbard
The scabbard keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also
helps keep the blades from being nicked or damaged when
the tool is in storage.
Assembly
Unpacking
This product has been shipped completely assembled.
Carefully remove the product and any accessories from the
box. Make sure that all items listed in the Packing List are
included.
WARNING: Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in serious
personal injury. Inspect the product carefully to make sure
no breakage or damage occurred during shipping. Do not
discard the packing material until you have carefully inspec-
ted and satisfactorily operated the product.
Packing list
· Hedge Trimmer
· Scabbard
· Operator's Manual
WARNING: If any parts are damaged or missing do
not operate this product until the parts are
replaced. Use of this product with damaged or
missing parts could result in serious personal injury.
WARNING: Do not attempt to modify this product
or create accessories not recommended for use
with this product. Any such alteration or modifi-
cation is misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the product when
assembling parts.
EN INSTRUCTION MANUAL
Operation
The lithium-ion battery can be charged at any time and will
not develop a "memory" when charged after only a partial
discharge. It is not necessary to run down the battery pack
charge before recharging. Remove the battery pack from
the tool when convenient for you and your job. You can
"top-off" your battery pack's charge before starting a big job
or long period of use.
Due to lithium-ion's fade-free properties, the only time it is
necessary to charge the lithium-ion battery pack is when
the pack has reached the end of its charge. To signal the end
of charge, power to the tool will drop quickly. Charge the
battery pack as needed.
Charging the battery (Fig 1)
Before using it the first time, fully charge the 2.0Ah battery
pack with 2.3A charger. A fully discharged battery pack with
a temperature between 5°C and 40°C will charge in about 1
hour.
Plug the charger adapter into power source. The green light
on the charger stand will illuminate, indicating
the charger is powered.
Slide the battery all the way into the charger stand. The red
light on the charger stand will illuminate,
indicating that the battery is charging.
The red light will go off after charging is complete and a
green light will appear.
NOTE: Batteries may become warm while charging. This is
normal. If the battery is hot after continuous use in the
tool, allow it to cool down to room temperature before
charging. This will extend the life of your batteries.
WARNING: Always disconnect the battery pack from the
tool before any assembly, adjustments or changing acces-
sories.
Starting and stopping the hedge trimmer
Switching on/off
To switch ON, firstly press and hold the lock-out button for
On/Off switch, then press the On/Off switch and keep it
pressed.
To switch OFF, release the lock-out button for On/Off switch
and then release the On/Off switch just like the picture
below.
REF. 08758