Serial Numbers - Peg-Perego pliko mini twin Instrucciones De Uso

the handles can be adjusted. Press the little
button behind the handles and pull upwards.
To lower the handles, do the opposite (Fig. b).
7 SWIVEL WHEELS (fig_a): In order to make
the wheels swivel, the lever (arrow 1) must
be lowered. To secure the wheels, move the
lever to the opposite direction (arrow 2). The
rear wheels are fixed.
BRAKE: To set the brake on the stroller,
lower the lever on the rear wheel unit with
your foot. To release the brake, lift the lever
(fig_b). When stationary, always apply the
brake.
8 HOOD: to apply the hoods, place the
attachments in their seats (matching left and
right) until they click.
9 Detach the outside of the soft cover at
the sides of the seat (fig_a), fasten the
double button of the hood (fig. b) and then
double-button the soft cover (fig_c). Lastly,
button the hoods on the back of the stroller
backrests (fig_d).
The hoods are adjustable and can be set in
several positions (fig_e) by simply pulling
them forward or back.
10 5-POINT SAFETY HARNESS: to fasten, insert
the two buckles of the waist strap (with
attached shoulder straps, arrow a) into the
leg divider strap until they click into place
(arrow b). To unfasten them, press the button
which is situated in the centre of the fastener
(arrow c) and pull the waist strap outwards
(arrow d).
11 To tighten the waist strap, pull on both sides
in the direction of the arrow. To loosen it do
the opposite.
12 It is possible to set the safety harness at 3
different heights, depending on how tall the
child is. As the child gets bigger, the harness
must be moved to a higher position.
13 To adjust the height of the safety harnesses,
release the two buckles on the rear of the
backrest.
Pull the shoulder straps towards you (arrow
a) until the buckles are released and insert
them in the backrest loops (arrow b). Remove
the shoulder straps from the sack (arrow
c) and insert them in the most appropriate
buckle (arrow d), then reattach the two
buckles behind the backrest (arrow e). The
buckles are securely attached when a click is
heard (fig f).
14 LEG REST ADJUSTMENT: The leg rest can be
set in 2 different positions. To lower the leg
rest, pull the two side levers downwards and
at the same time lower the leg rest. To raise
the leg rest, push it upwards until it clicks
into position.
BACKREST ADJUSTMENT: The reclining
backrest can be locked into a number of
positions (fig_b). To lower the backrest, lift
the middle handle and lower it, locking it
in the desired position. To raise it, push it
upwards.
15 FOLDING UP: lift the 3 levers upwards, one at
a time, until they click (fig_a), grip the central
handle (fig_b) and lift it up until the stroller
closes. The folded stroller is free-standing
(fig_c).
When folded, the stroller will stand upright
(fig_c).
16 CARRYING: The stroller can be conveniently
carried (with the front wheels set on
stationary) by the central handle (fig_a). It
can also be carried by the side handle (fig_b).
17 REMOVING THE LINING: to remove the
stroller's lining:
Remove the hoods by following the
instructions in figures 8 and 9 in reverse
order.
Undo the four buckles behind the backrests
(fig_a)
Remove the buckle from underneath the leg
divider (fig_b), unhook the two side elastics
and the two central elastics from the frame
(fig_c).
Unbutton the two central buttons (fig_d).
18 Remove the soft cover from the backrest,
folding it towards the seat (fig_e)
From both sides, undo the two screws with a
screwdriver (fig_f).
Lower the backrest to more easily undo the
two remaining screws in the middle (fig_g).
19 Unhook the frame (fig_h); see point 1 in
the paragraph on opening, unbutton and
remove the soft cover around the frame
(fig_i), and remove the soft cover from the
footrest (fig_l). Lift the soft cover upwards
(fig_m).

SERIAL NUMBERS

20 The Stroller PLIKO MINI has all the following
relevant information behind the backrest:
product name, date of manufacture and
serial number.
This information is required for any
complaints.
ACCESSORIES
21 COVER: practical cover (fig. a).
RAIN CANOPY: can be applied to the hood
(fig. b).
22 UMBRELLA: practical umbrella to match
(fig_a).
CUP HOLDER: may be attached to the
mushroom button on the frame of the
stroller (fig. b).
23 BAG: diaper-changing bag with pad for
changing baby's diaper (fig_a).
BABY CUSHION: for Peg Perego high chairs
and strollers. Winter side made with cozy
matelassé jersey and summer side made with
- 13 -