Publicidad
EN Installation and Connection of the Contact grill
Safety instructions
WARNING! ELECTRIC SHOCK HAZARD!
The unit may be operated only from properly installed electrical outlets with a single touch!
Device can cause injury if not correctly installed!
Prior to installing the data of the local power grid must be compared with the technical specifications of the device (see
type plate)!
Connect the device only in accordance!
Do not unplug the device from the socket with the cord!
The power cable must not come into contact with hot parts!
Make sure that the cable is exposed to heat sources and not in contact with sharp edges!
Do not let the cord hang down from the table or the bar!
WARNING! HOT SURFACE!
During the operation, some parts of the appliance become very hot. To avoid burns, do not touch the hot parts of the
device!
Do not use this appliance if it is not working properly, damaged or dropped to the ground.
Do not use any accessories or spare parts that were not recommended by the manufacturer. This could pose a danger to
the user or cause damage to the equipment and cause personal injury. In addition the warranty expires.
Do not route cables over carpeting or other heat insulation. Do not cover the cables. Keep the cables away from work
areas and do not submerge in water.
Do not pull the cord for moving the device. Before moving the unit always disconnect the power cord.
Do not wrap the cord around the device and do not bend it.
Protect the device from rain water, humidity and moisture.
During operation do not move and do not tip over the device.
Do not place objects on top of the pizza oven, which could possibly cover the chimney.
ATTENTION!
The installation and maintenance of the equipment must be carried out only by qualified personnel!
Unpack the unit and remove all packing material. Peel off the protective cover from the device. If adhesive residue
remains, remove them with a suitable solvent.
Publicidad
