Cleaning And Care; Overheating Protection Circuit - Unold 86410 Instrucciones De Uso

"Cooler" for the fan function (cool
air)
5. Then select the desired tempe-
rature on the rotary thermostat
regulator. The regulator is variably
adjustable.
6. The appliance heats until the
desired temperature is reached,
then the appliance switches off.
The appliance will switch on again
as soon as the room temperature
drops below the set temperature.
7. When you adjust the fan function,
you must
thermostat
highest position.

CLEANING AND CARE

Switch off the appliance. To
switch off the appliance, place
the rotary regulator on position
"OFF" and unplug the mains
plug.
Allow the appliance to cool
completely.
1. Never use any abrasive scouring
agents, steel
objects, hot cleaning agents or
disinfectants.

OVERHEATING PROTECTION CIRCUIT

1. The appliance is equipped with
an overheating protection circuit
that switches the appliance off
when it is heated over 70° C.
2. If the overheating protection cir-
cuit has been tripped, switch the
appliance off, unplug the plug
from the electrical outlet and let
22
place the rotary
regulator on
wool, metal
8. To switch off the appliance, place
the rotary regulator on the OFF
position.
9. Always switch off the appliance
after use by placing the rotary
regulator in the OFF position, and
unplug the appliance from the
electrical outlet.
Be aware that the appliance
can become very hot - fire
hazard! Particularly ensure
that children are kept away
from the appliance.
the
2. You can remove dust in the
appliance if you carefully hold a
vacuum cleaner against the air
inlet and outlet grille.
3. Store the fan heater in a dry, safe
place so that it is protected from
dust, shocks, heat and moisture.
the appliance cool for at least
10 minutes.
3. Eliminate the cause of the over-
heating, (e.g. excessive dust in
the appliance, air outlet grille is
covered) and start up the appli-
ance again.