3.2 Power on the device
•
Plug the mains cable completely into the mains connection on the
device.
•
Plug the power plug into a wall outlet.
•
Set the on/off switch to the „l" position.
If the electrical connection is interrupted during the mas-
sage, massage heads will return immediately to the
parking position after being reconnected to the power
supply.
3.3 Functions and remote control
After the unit is powered and the On/Off switch is set to position „I", the unit
is in sleep mode.
Only a few basic functions are available in this mode.
•
The o buttons change the angle of the back section and the leg section
of the device.
•
Button u switches the reading light on/off.
•
Button 8 switches the unit on completely.
Overview of all remote control buttons
8 On/Off button: Press the button once: The button and the display lights
up and device is ready. Now select one of the massage function buttons to
start the massage. Press button 8 again to end all massage functions. The
moving parts of the massage chair will then return to their original position.
9 Pause (II)
Press the button to pause the current massage program.
Press again to resume the massage.
see postion
6
j General (demonstration)
Press j to activate an automatic demonstration for all massage functions of the
chair. The automatic program performs a combined function with kneading/Swe-
dish massage/tapping/shiatsu massage. The demonstration lasts 15 minutes and
then stops automatically. Press the button again to stop the automatic program
manually.
0 Deep Tissue (demonstration)
Press 0 to activate an automatic demonstration for all massage functions of the
chair. The automatic program performs a combined function with kneading/Swe-
dish massage/tapping. The demonstration lasts 15 minutes and then stops auto-
matically. Press the button again to stop the automatic program manually.
q Sleeping (Automatic Program)
A relaxing full body massage combined with a light tapping massage can help you
to fall asleep better at night. Attention: Do not fall asleep in the massage chair!
w Up/down: Changes the direction of movement of the massage heads
h Kneading (kneading massage)
Press the h button to activate the kneading function for a full back massage
at medium strength and press the button again to end the kneading function. 5
speed levels can be set with the Speed r button.
g Shiatsu (Shiatsu massage)
Press once to activate the Shiatsu function for a full back massage at medium
width and speed; press again to stop the Shiatsu massage function. The distan-
ce between the massage heads can be adjusted by pressing the Width z button
(3 levels), the speed can be adjusted by pressing the Speed r button (5 levels).
Note: Shiatsu massage can be combined with kneading massage.
f Rolling (roll massage)
Press once to activate the roll function for a full back massage in medium width;
press again to stop the roll function. The distance between the massage heads
can be adjusted by pressing the Width z button (3 levels).
d Tapping (tapping massage)
Press once to activate the tapping function for a full back massage at medium
width and speed; press again to stop the tapping function. The distance between
the massage heads can be adjusted by pressing the Width z button (3 levels),
the speed with the Speed r button (5 levels).
Note: The tapping massage can be combined with the kneading massage.
GB
3 Operating
6