Fermax 5276 Manual De Usuario página 16

Cod. 97864 V04_17
Delete User Card(s) or PIN(s) by Remote Control
Programming Step
1. Enter Program Mode
2. Delete User By User ID
OR
2. Delete User – By Card
OR
2. Delete User – By Card number
OR
2. Delete User – By PIN
OR
2. Delete All User
3. Exit Program Mode
Step 2
BY MASTER CARDS
Add Users by Master Add Card
Add card users
Master Add Card – Read User Card – Master Add Card (Cards can be added continuously)
Add PIN users
Master Add Card – Input PIN – Master Add Card (PINs can be added continuously)
Delete Users by Master Delete Card
Delete card users
Master Delete Card – Read Card – Master Delete Card (Cards can be deleted continuously)
Delete PIN users
Master Delete Card – Input PIN – Master Delete Card (PINs can be deleted continuously)
BY REMOTE CONTROL
Set Relay Configuration
The relay configuration sets the behavior of the output relay on activation.
Programming Step
1. Enter Program Mode
2. Pulse Mode
OR
2. Toggle Mode
3. Exit Program Mode
Keystroke Combination
* (Master Code) #
2 (User ID) #
2 (Read Card on External Reader) #
2 (Input last 8 digits Card number) #
2 (Input PIN) #
2 (Mater Code) #
*
Keystroke Combination
* (Master Code) #
3 (1~99) #
The relay time is 1~99 seconds. (1 is 50mS)
(Factory default is 5 seconds)
3 0 #
Sets the relay to ON/OFF Toggle mode
*
16