Microsoft XBOX 360 Manual De Usuario página 10

Insert batteries according to the following
instructions.
To insert batteries into the wireless controller
AA battery pack:
Press the tab on the top of the AA battery
1
pack and pull down to detach it from the
controller.
Insert two new AA (LR6) batteries with
2
their positive (+) and negative (–) ends as
shown on the underside of the battery
pack. For best performance, AA
rechargeable batteries are not
recommended.
Slide the AA battery pack back into place
3
on the controller and push it in to lock.
removeControllerbatteries
 AboardAircraft
Before boarding any aircraft or packing
the wireless controller in luggage that
will be checked, remove any batteries
from the wireless controller. The
wireless controller can transmit radio
frequency (RF) energy, much like a
cellular telephone, whenever batteries
are installed.
ConnectyourwirelessControllerto
yourConsole
Your Xbox 360 Wireless Controller comes
already wirelessly connected to your console,
right out of the box. Should you need to
reconnect your wireless controller to your
console or connect to a different console, see
"Add Wireless Controllers."
turnyourConsoleandwireless
ControllerOn
To turn your console and controller on, press
and hold the Xbox Guide button on your
controller.
To turn on your console only, press the Power
button on your console. To turn on your
controller only, press the Start button on your
controller.

nOTE
To avoid pinching your fingers when inserting,
push only on the flat surface of the battery
pack.
turnyourConsoleandwireless
ControllerOff
To turn your console and controller off, press
and hold the Xbox Guide button on your
controller for three seconds. Then select
whether you want to turn off just your
controller or both your controller and your
console. (Selecting the console will turn off
both the console and all connected
controllers.)
Pressing the power button on your console
will turn off both the console and any
connected wireless controllers.
SelectlanguageandOtherSettings
The first time you turn on your Xbox 360
console, you'll be prompted to enter a
language. Follow the prompts to select a
language for your console.
You can change language and other console
settings in the System area of the Xbox
Dashboard, including time, audio, display, and
automatic turn-off after six hours of non-use.
9