General EMR813 Manual Del Usuario página 3

REMOTE SENSOR:
Lift off the bracket stand, loose the 4 screws with a
small screwdriver, insert 2 "AAA" batteries according
to the polarity indicated. Replace the cover and
tighten the 4 screws.
SETTING UP THE WIRELESS
THERMOMETER:
• For the first installation, always insert batteries to
the home unit and then the remote sensor. Your
new RF Thermometer is built with random security
code technology, the home unit will learn the
random code of the first remote sensor and log in
as channel 1. Channel 2 and Channel 3 will be
registered in the same way.
• The registered channels will be erased when the
batteries of the remote sensor or the home unit
are removed.
• When replacing batteries for the remote sensor,
remember to clear the corresponding channel of
the home unit in this way: Select the respective
channel by pressing the CHANNEL button, hold the
CHANNEL button 3 seconds to clear the
registration.