Application; Description (Fig.A); Package Content List; Symbols - CMT ORANGE TOOLS CMT11 Manual De Instrucciones

1.

APPLICATION

Depending on which accessory mounted this power tool
is intended for dry sanding small areas and for sawing,
scraping polishing, rasping, cutting and separating.
WARNING! Read this manual and general
safety instructions carefully before using the
appliance, for your own safety. Your power
tool should only be passed on together with
these instructions.
2. DESCRIPTION (FIG. A)
1. Quick release lever
2. Quick release clamp
3. Oscillation frequency controller
4. On/Off switch
5. Vent holes
6, 7, 8, 9. Dust extraction hose & holder
10. Handle (it can be installed into A or B)
3.

PACKAGE CONTENT LIST

1 x Multi-use tool
1 x Handle
1 x Vacum hose
1 x Manual
1 x Carry Case
• Remove all packaging materials.
• Remove remaining packing and
package inserts (if included).
• Check that the package contents are
complete.
• Check the appliance, the power cord,
the power plug and all accessories tor
transportation damage.
• Keep the packing materials as far as possible
till the end of the warranty period. Dispose
it into your local waste disposal system
afterwards.
WARNING: Packaging materials are not toys!
Children must not play with plastic bags!
Danger of suffocation!
lf any parts are missing or damaged, please
contact your dealer.
www.cmtorangetools.com
4.

SYMBOLS

In this manual and/or on the machine the following
symbols are used:
Denotes risk of personal injury
or damage to the tool.
Read manual before use
Wear noise protection
Wear eye protection
In accordance with essential requirements of
the European directive(s)
Wear a mask In dusty conditions
« Class Il - The machine is double insulated;
Earthing wire is therefore not necessary. »
EN
7