Prepare The Beeper Locator - SportDOG DSL-400-19 Manual De Funcionamiento

PREPARE THE BEEPER LOCATOR

1. Use the Left Switch to select a
mode setting.
2. Use the Right Switch to select a
sound setting.
3. Set the Volume Switch to the LOW
position for first time use. Then tighten
the Settings Compartment Lid snugly to
ensure it is watertight.
4. Insert the 3-volt lithium (CR123A)
battery, following the positive and
negative indicators, into the compartment. Tighten the Battery
Compartment Lid until it becomes difficult to turn.
TO TURN THE BEEPER LOCATOR ON
The position of the Battery Compartment Lid is the ON/OFF switch. With the
Battery Compartment Lid tightened, align the dot on the Lid to the ON position (
TO TURN THE BEEPER LOCATOR OFF
The Battery Compartment Lid allows you to easily turn the Beeper Locator OFF in
the field without having to remove the collar strap. Re-align the dot on the Battery
Compartment Lid to the OFF position (
NOTE: The Battery Compartment is waterproof in both the ON and OFF positions.
ON
TO TEST THE BEEPER LOCATOR
Turn the Beeper Locator ON (
Beeper Locator should then begin to beep once per second.
8
).
OFF
) and hold it motionless for several seconds. The
SPORTDOG.COM
).