Resistance Measurement - AEMC Instruments 502 Manual De Instrucciones

4.4 Resistance Measurement

• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and
the black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the sample
under test.
WARNING: Immediately unclamp the meter
from the conductor under test if overload "
is displayed.
WARNING: When making a resistance mea-
surement, make sure that the power is off
(dead circuit), and that all capacitors in the
measured circuit are fully discharged.
TRMS Clamp-on Meter Model 502
range.
"
13