Exacta EL-220 Manual De Instrucciones página 16

GB
Rotating cylinder
You can activate the rotation function with the switch located next to the
"+ and -" keys on the device. Select the direction of rotation by sliding the
switch to the left or right. This rotary function is activated when the plates
and the rotary cylinder are tightened and only works when the plates are
closed. The central position of the switch turns off the rotary function.
INSTRUCTIONS FOR USE
Before use, make sure your hair is clean, dry and free of knots.
Insert the plug into the outlet, the display turns on and "OFF" appears and
the blue light starts flashing.
Pressing and holding the on / off button for a few seconds, 200°C, the
default temperature setting, appears on the display. Use the + and - keys
to select the desired temperature to increase or decrease the temperature
by 10°C. The temperature range can be selected between 120°C to 230°C.
The blue light on the display comes on and four bars appear at the word
"HEAT" and start flashing to indicate that the plate is heating up. When the
product has reached the set temperature the light on the display turns
green, the four bars stay on, and stop flashing and the product is ready
for use.
The range of adjustments allows the product to be used on all hair types,
even the most delicate or difficult.
After using the product, press the on/off button to turn off. Always wait
until the product is completely cooled before storing.
Select °C or °F
Keeping the "+" key pressed for a few seconds, you can set Celsius (°C) or
Fahrenheit (°F)
16