Joyello WROOM JL-983 Manual De Instrucciones página 18

GB
4. Once the child seat is attached to the car seat, loosen the harness by pulling on the straps while
pressing the harness adjuster button
To place the child in the seat, loosen the belts, releasing the buckle fastening mechanism, pressing
the button intended for this and place the belts on the sides of the seat (fig. 4).
INSTALLATION WITH BACK SEAT
Groups II and III
Group II: 15 kg-25 kg
GROUP III: 22 kg-36 kg
REMOVING THE SEAT BELTS
REMOVE PILLOW HEADREST PILLOW AND INTERNAL GEAR
For children of weight groups II and III (15 kg - 36 kg), the harness must be removed and the
vehicle's seat belt must be used to attach the child.
18
5. Position the child correctly in the seat (FIG.5)
6. Reconnect the harness to the buckle until it clicks into place.
(FIG.6)
7. Adjust the perfect grip of the seat belt on the child by pulling
the seat belt adjustment belt (fig. 7)
8. Make sure that the child is properly secured, that the buckle
is not pressing on the child's stomach, that the harness is tight
without causing discomfort and that the shoulder pads are at the
right height for the shoulders. The baby's body should not be
placed in an unnatural position. (Fig.8)