Technical Data; Lighting; Handling/Transport - OP PNEUMATIC UNISPEED Manual De Uso

OP
S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 0303580838
__________________________________________________________________________________
•
Safety systems providing protection against the risks related to the process.
Air pressure required (bar)
Dimensions (LxHxD in mm)
Weight excluding tools (Kg)

LIGHTING

The equipment does not have its own lighting and so it must be used in suitably
illuminated areas. If perfect visibility is not possible in the working area, use of the
equipment must not be authorised.

HANDLING/TRANSPORT

CAUTION
The personnel in charge with the handling and transport should pay the
highest attention so that the machine doesn't suffer any shock or strain which
could compromise the efficiency of the machine and that the personnel is not
exposed to risks.
The machine is easily handled, thanks to the handle on the top of its structure and its
light weight. However, the following rules should always be observed:
•
Lift the equipment by means of the handle on the top of its structure only, always
keeping it horizontal.
•
Avoid knocks or shaking when handling.
•
If the machine has to be shipped, make sure that it is securely fixed to the means of
transport and protected against crushing or vibrations.
•
During the handling be careful not to unbalance the machine, there could be oil
leackages from the tank or it could overturn.

TECHNICAL DATA

Prefitting range (mm)
Controls
Noise level
_
PNEUMATIC
UNISPEED 01
6 - 42
max. 6 bar
305x640x210
Pneumatic
42
83.3 dB
29
E
N
G
L
I
S
H