Attach A Res Med Passover Humidifier - ResMed S8 Compact System Manual De Instrucciones

338249r1.book Page 11 Friday, June 10, 2005 3:22 PM
A R M
TTACH A ES ED
Please refer to the illustrations in section G of the illustration sheet.
To connect your
sized 21" (52 cm) air tubing.
1
P
Fill the
ASSOVER
air tubing (G-1).
2
S8 C
Place the
OMPACT
medium air tubing to the air outlet (G-3).
Note: To avoid water spilling into the S8 Compact, do not place it underneath the
humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing (G-4).
4
Connect the power cord to the socket at the rear of the
other end into a power outlet.
Please refer to the ResMed Passover User's Manual for further details.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The S8 C
OMPACT
P H
ASSOVER UMIDIFIER
S8 C
to a ResMed
OMPACT
with water and connect the medium 21" (52 cm) and long 6'6" (2 m)
P
on top of the
ASSOVER
is now ready for use with the
P
humidifier you need medium
ASSOVER
(G-2) and connect the free end of the
S8 C
OMPACT
P .
ASSOVER
H A
OW TO TTACH A
and plug the
11
H
UMIDIFIER