Self-Cleaning Function - EMS EMSER Instrucciones De Uso

irreparable damage and it will mean that the best treat-
ment results can no longer be guaranteed.
•
Cleaning
The mesh atomiser with container and the used acces-
with hot water after each use. Dry the parts carefully us-
ing a soft cloth. Put the parts together again if they are
completely dry and place them in a dry, sealed container
or disinfect them.
•
from the atomiser.
• Pour 6 ml of clean water into the medication container
•
•
Disassembling
•
the unit off horizontally
towards the front.
• Reassembly is carried
Important
dry all parts carefully.
mucous membranes, or if they were swallowed or inhaled.
ly damp cloth, which you can moisten with a mild soapy
solution.
• If there is any residue from medical solutions or contam-
atomiser, clean with a cotton bud moistened with ethyl
alcohol.
• Also clean the outer sides of the mesh and the medication
container with a cotton bud moistened with ethyl alcohol.
-
Important
•
down each time before cleaning.
•
•
•
washer!
•
•
other nebuliser parts and lead to a malfunction.
Important
We recommend carrying out inhalation without interrup-
tions since the inhalant may clog the mesh atomiser dur-
application may be impaired as a result.

Self-cleaning function

function.
To do this, proceed as follows:
1. Pour 0.5 to 1.0 ml of tap wa-
ter or distilled water mixed
to the opening of the mesh
age through the lateral open-
.
2. Press and hold the On/Off
-
-
place some protection under the nebuliser if necessary.
18
-
-
-
medication container. Therefore,
-
-
-
-