Cleaning Before First Use; Operation; Use - Imetec N6702 Instrucciones De Uso

WARNING! Before use, wash all parts which will come into
EN
contact with food.
• Wash the bottom and top plates with a damp and well-wrung sponge.
• Dry with a dry cloth
The appliance has the following functions:
O button
I button
WARNING! This appliance is not to be used if it has been
dropped or if there are visible signs of damage.
WARNING! Risk of burn. DO NOT touch the metallic parts
during operation and until the appliance is completely
cooled down.
WARNING! The bread may burn and produce flames and / or
smoke. DO NOT use water to extinguish. Disconnect the
appliance and use a damp cloth to put out any flames.
WARNING! Risk of scalding. DO NOT move the appliance
while it is in operation.
• Completely unwind the power cable before use.
• When used for the first time, the toaster may emit a little smoke and odour caused by
possible manufacturing residues. Wait for a few minutes before inserting the food.
• Connect the power plug to the mains socket.
• Place the switch in the ON position [Fig. B].
• The red mains LED turns ON.
• Wait until the green ready to use light is ON.
• Remove the plate closure hook [Fig. C].
• Open the cover by lifting it with the handle [Fig. D].
• Place the food on the bottom plate and close the cover.
12

CLEANING BEFORE FIRST USE

OPERATION

Control
If the button is in position "O", the appliance
is switched OFF.
If the button is in position "I", the appliance is
switched ON and the red mains LED on the
lid comes on. When the plate reaches the
right temperature, the green LED comes on
and food can be inserted.

USE

Function