Thank you for your confidence in us and congratulations on your
purchase!
You have acquired a quality product with your purchase of the promed MTX upper
arm blood pressure monitor. To ensure the best results and long-term satisfaction with
your promed MTX blood pressure monitor, we recommend that you read the follo-
wing operating and maintenance instructions carefully.
2.1 Items supplied and packaging
Please check first of all that the device is complete and is not damaged in any way. In
case of doubt, do not use it and contact your dealer or your service centre.
The following parts are included:
• 1 promed Blood pressure monitor MTX
• 1 Preformed sleeve with air pipe
• 4 Batteries (AA type, LR 6) 1,5V
• 1 Storage bag
• 1 Blood pressure certificate
• 1 Instruction manual
The packaging can be reused or recycled. Please dispose properly of any packaging
material no longer required. If you notice any transport damage during
unpacking, please contact your dealer without delay.
WARNING
Please ensure that the polythene packing is kept away from the
reach of children! Risk of suffocation!
2.2 What is blood pressure?
Blood pressure is the pressure created in the blood vessels by each heart beat. When
the heart contracts (= systole) and pumps blood into the arteries, it brings about a rise
in pressure. The highest value is known as the systolic pressure and is the first value to
be measured. When the cardiac muscle relaxes to take in fresh blood, the pressure in
the arteries also falls. Once the arteries are relaxed, a second reading is taken – the
diastolic pressure.
2.3 How is blood pressure measured?
The MTX is a blood pressure unit which is used to measure blood pressure at the
upper arm. The measurement is carried out by a microprocessor, which, via a pres-
sure sensor, measures the vibrations resulting from the inflation and deflation of the
cuff over the artery.
2 Useful Information
GB
25